wklind
10-03-2007, 03:36 AM
I have a Pansat 27700A with the following System Information: X-87BL, API: 75-2.13_EUbX, Boot Ver: 75, 12 Sep 2007.
I set up two dishes pointing at Nimiq 1 and Nimiq 2. Each picks up many transponders and channels, but they all come blank with "Wait for Picture" forever. I have noticed that many of the transponders respond with SR(msps) 19.999. I have checked on Lyngsat and I can find no TP's listed with SR 19.999.
I have another dual LNB dish pointed at Echo 110/119. All these TP's come in with SR 20.000 which matches Lyngsat. However, many of the TP's do not match Lyngsat.
Further, when I select ant Nimiq channel (which comes in black screen) and then return to a DN channel, the DN channel will also be black screen. I can then go to the DN key screen, verify that the key is current and good, and select to save changes (even though I made no changes) and get DN channels back again.
I have looked through the menus and I notice that under Parental Control, CAS System there is no listing for the BEV keys. I recognize that this may be part of the problem. If so, exactly where do I enter the keys and what is the key heading data? I have the BEV keys, but no place to enter them.
Here is a list of the TP's I receive from the Nimiq satellites:
Nimiq 1:
DFreq Pol SR
12236 H 19.999
12265 H 19.999
12294 H 19.999
12323 H 19.999
12352 H 19.999
12381 H 19.999
12410 H 19.999
12439 H 19.999
12468 H 19.999
12498 H 19.999
12527 H 19.999
12557 H 19.999
12586 H 19.999
12615 H 19.999
12644 H 19.999
12673 H 19.999
12222 V 19.999
12251 V 20.000
12279 V 19.999
12308 V 19.999
12338 V 19.999
12367 V 19.999
12396 V 19.999
12425 V 19.999
12455 V 19.999
12484 V 19.999
12513 V 19.999
12542 V 19.999
12571 V 19.999
12601 V 19.999
12630 V 19.999
12659 V 19.999
Nimiq 2:
DFreq Pol SR
12239 H 19.999
12268 H 19.999
12298 H 19.999
12327 H 19.999
12356 H 19.999
12385 H 19.999
12414 H 19.999
12443 H 19.999
12472 H 19.999
12501 H 19.999
12530 H 19.999
12559 H 19.999
12588 H 19.999
12618 H 19.999
12648 H 19.999
12677 H 19.999
12224 V 19.999
12253 V 19.999
12283 V 20.000
12312 V 20.000
12340 V 20.000
12370 V 19.999
12399 V 19.999
12457 V 19.999
12486 V 19.999
12575 V 20.000
12603 V 19.999
12632 V 19.999
12662 V 19.999
I am looking forward to anyone who has any idea concerning why I am unable to receive channels from the Nimiq satellites.
thanx,
ken
I set up two dishes pointing at Nimiq 1 and Nimiq 2. Each picks up many transponders and channels, but they all come blank with "Wait for Picture" forever. I have noticed that many of the transponders respond with SR(msps) 19.999. I have checked on Lyngsat and I can find no TP's listed with SR 19.999.
I have another dual LNB dish pointed at Echo 110/119. All these TP's come in with SR 20.000 which matches Lyngsat. However, many of the TP's do not match Lyngsat.
Further, when I select ant Nimiq channel (which comes in black screen) and then return to a DN channel, the DN channel will also be black screen. I can then go to the DN key screen, verify that the key is current and good, and select to save changes (even though I made no changes) and get DN channels back again.
I have looked through the menus and I notice that under Parental Control, CAS System there is no listing for the BEV keys. I recognize that this may be part of the problem. If so, exactly where do I enter the keys and what is the key heading data? I have the BEV keys, but no place to enter them.
Here is a list of the TP's I receive from the Nimiq satellites:
Nimiq 1:
DFreq Pol SR
12236 H 19.999
12265 H 19.999
12294 H 19.999
12323 H 19.999
12352 H 19.999
12381 H 19.999
12410 H 19.999
12439 H 19.999
12468 H 19.999
12498 H 19.999
12527 H 19.999
12557 H 19.999
12586 H 19.999
12615 H 19.999
12644 H 19.999
12673 H 19.999
12222 V 19.999
12251 V 20.000
12279 V 19.999
12308 V 19.999
12338 V 19.999
12367 V 19.999
12396 V 19.999
12425 V 19.999
12455 V 19.999
12484 V 19.999
12513 V 19.999
12542 V 19.999
12571 V 19.999
12601 V 19.999
12630 V 19.999
12659 V 19.999
Nimiq 2:
DFreq Pol SR
12239 H 19.999
12268 H 19.999
12298 H 19.999
12327 H 19.999
12356 H 19.999
12385 H 19.999
12414 H 19.999
12443 H 19.999
12472 H 19.999
12501 H 19.999
12530 H 19.999
12559 H 19.999
12588 H 19.999
12618 H 19.999
12648 H 19.999
12677 H 19.999
12224 V 19.999
12253 V 19.999
12283 V 20.000
12312 V 20.000
12340 V 20.000
12370 V 19.999
12399 V 19.999
12457 V 19.999
12486 V 19.999
12575 V 20.000
12603 V 19.999
12632 V 19.999
12662 V 19.999
I am looking forward to anyone who has any idea concerning why I am unable to receive channels from the Nimiq satellites.
thanx,
ken